To get console access to your GP2X you can use your USB Cable. I found this forum-posting here.
I just added the needed files inside the pack (usbser.sys was in the driver.cab). Download the pack here, then copy the examples directory to your GP2X. Now disconnect your USB connection (press X) and install the USB gadget serial driver by right clicking on the gserial.inf file.
Start bash.gpe on your GP2X. Start up a terminal (HyperTerminal should be ok) select the new COM32 port, connect (38’400, no flow control), press enter and you’ll see the bash shell:
1 2 3 4 5 6 7 8 9 10 11 12 | bash-2.05a# uname –a Linux Linux 2.4.25 #2966 2006. 01. 27. (±Ý) 17:29:30 KST armv4l unknown bash-2.05a# df –h Filesystem Size Used Available Use% Mounted on rootfs 24.0M 9.7M 14.3M 41% / /dev/root 24.0M 9.7M 14.3M 41% / /dev/discs/disc0/part1 119.1M 28.2M 90.9M 24% /mnt/sd bash-2.05a# free total used free shared buffers Mem: 30480 6668 23812 0 56 Swap: 0 0 0 Total: 30480 6668 23812 |
One Comment
1 gilbert wrote:
hey need help i did every thing and nuthing nuthing om my gp2x or pc the terrminal shows nuthong