<?xml version="1.0" encoding="UTF-8"?><rss version="2.0"
	xmlns:content="http://purl.org/rss/1.0/modules/content/"
	xmlns:dc="http://purl.org/dc/elements/1.1/"
	xmlns:atom="http://www.w3.org/2005/Atom"
	xmlns:sy="http://purl.org/rss/1.0/modules/syndication/"
	
	>
<channel>
	<title>Comments on: StripInvaders Howto Assemble</title>
	<atom:link href="http://neophob.com/2012/01/stripinvaders-howto-assemble/feed/" rel="self" type="application/rss+xml" />
	<link>http://neophob.com/2012/01/stripinvaders-howto-assemble/</link>
	<description>are you still afraid?</description>
	<lastBuildDate>Mon, 08 Jul 2019 19:58:13 +0000</lastBuildDate>
		<sy:updatePeriod>hourly</sy:updatePeriod>
		<sy:updateFrequency>1</sy:updateFrequency>
	<generator>https://wordpress.org/?v=3.9.40</generator>
	<item>
		<title>By: Sasha Beep (@sashabeep)</title>
		<link>http://neophob.com/2012/01/stripinvaders-howto-assemble/#comment-3638</link>
		<dc:creator><![CDATA[Sasha Beep (@sashabeep)]]></dc:creator>
		<pubDate>Sun, 01 Feb 2015 18:08:58 +0000</pubDate>
		<guid isPermaLink="false">http://neophob.com/?p=1412#comment-3638</guid>
		<description><![CDATA[How to wire WS2811 stripes?]]></description>
		<content:encoded><![CDATA[
Warning: preg_replace(): The /e modifier is no longer supported, use preg_replace_callback instead in /home/httpd/vhosts/pixelinvaders.ch/httpdocs/neophob.com/wp-content/plugins/codecolorer/codecolorer-core.php on line 49

Warning: preg_replace(): The /e modifier is no longer supported, use preg_replace_callback instead in /home/httpd/vhosts/pixelinvaders.ch/httpdocs/neophob.com/wp-content/plugins/codecolorer/codecolorer-core.php on line 50
]]></content:encoded>
	</item>
	<item>
		<title>By: Daniel</title>
		<link>http://neophob.com/2012/01/stripinvaders-howto-assemble/#comment-2372</link>
		<dc:creator><![CDATA[Daniel]]></dc:creator>
		<pubDate>Fri, 05 Jul 2013 20:31:21 +0000</pubDate>
		<guid isPermaLink="false">http://neophob.com/?p=1412#comment-2372</guid>
		<description><![CDATA[you are right. thats was the problem. i did a fresh install and it worked.
so now the arduino is running and the config is set correctly. data is on pin 3 and clock on pin 3. for testing purposes i only set up 1 strand, so 50 pixels. the problem is, the pixels are off. not a single one is lit up.

did i make a mistake? the psu (5v8a) is connected to the side with the female jst connector. on the other end of the strand blue goes to GND, yellow to pin 3 and green to pin 2.

thank you very much for your help btw!!]]></description>
		<content:encoded><![CDATA[
Warning: preg_replace(): The /e modifier is no longer supported, use preg_replace_callback instead in /home/httpd/vhosts/pixelinvaders.ch/httpdocs/neophob.com/wp-content/plugins/codecolorer/codecolorer-core.php on line 49

Warning: preg_replace(): The /e modifier is no longer supported, use preg_replace_callback instead in /home/httpd/vhosts/pixelinvaders.ch/httpdocs/neophob.com/wp-content/plugins/codecolorer/codecolorer-core.php on line 50
]]></content:encoded>
	</item>
	<item>
		<title>By: michu</title>
		<link>http://neophob.com/2012/01/stripinvaders-howto-assemble/#comment-2371</link>
		<dc:creator><![CDATA[michu]]></dc:creator>
		<pubDate>Fri, 05 Jul 2013 18:58:35 +0000</pubDate>
		<guid isPermaLink="false">http://neophob.com/?p=1412#comment-2371</guid>
		<description><![CDATA[Looks like you messed up your library installation, take a look at http://arduino.cc/en/Guide/Libraries and make sure you installed each library only once.]]></description>
		<content:encoded><![CDATA[
Warning: preg_replace(): The /e modifier is no longer supported, use preg_replace_callback instead in /home/httpd/vhosts/pixelinvaders.ch/httpdocs/neophob.com/wp-content/plugins/codecolorer/codecolorer-core.php on line 49

Warning: preg_replace(): The /e modifier is no longer supported, use preg_replace_callback instead in /home/httpd/vhosts/pixelinvaders.ch/httpdocs/neophob.com/wp-content/plugins/codecolorer/codecolorer-core.php on line 50
]]></content:encoded>
	</item>
	<item>
		<title>By: Daniel</title>
		<link>http://neophob.com/2012/01/stripinvaders-howto-assemble/#comment-2370</link>
		<dc:creator><![CDATA[Daniel]]></dc:creator>
		<pubDate>Fri, 05 Jul 2013 18:01:46 +0000</pubDate>
		<guid isPermaLink="false">http://neophob.com/?p=1412#comment-2370</guid>
		<description><![CDATA[That did the trick in this case =) thanks.

But now I get a lot of &quot;multiple definitions&quot; errors... for example

ArdOSC\OSCArg.cpp.o: In function `OSCArg&#039;:
C:\Users\Daniel\Documents\Arduino\libraries\ArdOSC/OSCArg.cpp:20: multiple definition of `OSCArg::OSCArg()&#039;
OSCArg.cpp.o:C:\Users\Daniel\AppData\Local\Temp\build3054091402128806109.tmp/OSCArg.cpp:20: first defined here
ArdOSC\OSCArg.cpp.o: In function `OSCArg&#039;:
C:\Users\Daniel\Documents\Arduino\libraries\ArdOSC/OSCArg.cpp:20: multiple definition of `OSCArg::OSCArg()&#039;
OSCArg.cpp.o:C:\Users\Daniel\AppData\Local\Temp\build3054091402128806109.tmp/OSCArg.cpp:20: first defined here
ArdOSC\OSCArg.cpp.o: In function `OSCArg&#039;:
C:\Users\Daniel\Documents\Arduino\libraries\ArdOSC/OSCArg.cpp:27: multiple definition of `OSCArg::OSCArg(char)&#039;
OSCArg.cpp.o:C:\Users\Daniel\AppData\Local\Temp\build3054091402128806109.tmp/OSCArg.cpp:27: first defined here
ArdOSC\OSCArg.cpp.o: In function `OSCArg&#039;:

this continues a while....]]></description>
		<content:encoded><![CDATA[
Warning: preg_replace(): The /e modifier is no longer supported, use preg_replace_callback instead in /home/httpd/vhosts/pixelinvaders.ch/httpdocs/neophob.com/wp-content/plugins/codecolorer/codecolorer-core.php on line 49

Warning: preg_replace(): The /e modifier is no longer supported, use preg_replace_callback instead in /home/httpd/vhosts/pixelinvaders.ch/httpdocs/neophob.com/wp-content/plugins/codecolorer/codecolorer-core.php on line 50
]]></content:encoded>
	</item>
	<item>
		<title>By: michu</title>
		<link>http://neophob.com/2012/01/stripinvaders-howto-assemble/#comment-2369</link>
		<dc:creator><![CDATA[michu]]></dc:creator>
		<pubDate>Fri, 05 Jul 2013 17:15:45 +0000</pubDate>
		<guid isPermaLink="false">http://neophob.com/?p=1412#comment-2369</guid>
		<description><![CDATA[You installed the library correct, in the correct directory?]]></description>
		<content:encoded><![CDATA[
Warning: preg_replace(): The /e modifier is no longer supported, use preg_replace_callback instead in /home/httpd/vhosts/pixelinvaders.ch/httpdocs/neophob.com/wp-content/plugins/codecolorer/codecolorer-core.php on line 49

Warning: preg_replace(): The /e modifier is no longer supported, use preg_replace_callback instead in /home/httpd/vhosts/pixelinvaders.ch/httpdocs/neophob.com/wp-content/plugins/codecolorer/codecolorer-core.php on line 50
]]></content:encoded>
	</item>
	<item>
		<title>By: Daniel</title>
		<link>http://neophob.com/2012/01/stripinvaders-howto-assemble/#comment-2368</link>
		<dc:creator><![CDATA[Daniel]]></dc:creator>
		<pubDate>Fri, 05 Jul 2013 15:45:54 +0000</pubDate>
		<guid isPermaLink="false">http://neophob.com/?p=1412#comment-2368</guid>
		<description><![CDATA[hi michu,

first of all your project looks amazing!
I bought myself an Arduino Mega 2560 with ethernet shield as I want to use 5 strings of 50 pixels with stripinvaders.

I downloaded the 3rd Party librarys and opened the stripinvaders.ino. but when i want to compile i get the error:

EthernetBonjour.cpp:38:37: error: utility/EthernetUtil.h: No such file or directory
EthernetBonjour.cpp:41:28: error: EthernetCompat.h: No such file or directory

But there IS the directory &quot;utility&quot; and inside there ARE both files.

I really hope you can help me here.

Greetings Daniel]]></description>
		<content:encoded><![CDATA[
Warning: preg_replace(): The /e modifier is no longer supported, use preg_replace_callback instead in /home/httpd/vhosts/pixelinvaders.ch/httpdocs/neophob.com/wp-content/plugins/codecolorer/codecolorer-core.php on line 49

Warning: preg_replace(): The /e modifier is no longer supported, use preg_replace_callback instead in /home/httpd/vhosts/pixelinvaders.ch/httpdocs/neophob.com/wp-content/plugins/codecolorer/codecolorer-core.php on line 50
]]></content:encoded>
	</item>
	<item>
		<title>By: Daniel</title>
		<link>http://neophob.com/2012/01/stripinvaders-howto-assemble/#comment-2284</link>
		<dc:creator><![CDATA[Daniel]]></dc:creator>
		<pubDate>Sat, 15 Jun 2013 06:57:53 +0000</pubDate>
		<guid isPermaLink="false">http://neophob.com/?p=1412#comment-2284</guid>
		<description><![CDATA[Hi, 

Just discovered your projects, very awesome.

For strip invaders you hinted on github that it might also work with LPD 8806 based strips. Is that still the case or an artifact? If yes, how do I activate the support for LPD8806?

Thanks,
Daniel]]></description>
		<content:encoded><![CDATA[
Warning: preg_replace(): The /e modifier is no longer supported, use preg_replace_callback instead in /home/httpd/vhosts/pixelinvaders.ch/httpdocs/neophob.com/wp-content/plugins/codecolorer/codecolorer-core.php on line 49

Warning: preg_replace(): The /e modifier is no longer supported, use preg_replace_callback instead in /home/httpd/vhosts/pixelinvaders.ch/httpdocs/neophob.com/wp-content/plugins/codecolorer/codecolorer-core.php on line 50
]]></content:encoded>
	</item>
	<item>
		<title>By: roman</title>
		<link>http://neophob.com/2012/01/stripinvaders-howto-assemble/#comment-1941</link>
		<dc:creator><![CDATA[roman]]></dc:creator>
		<pubDate>Thu, 02 May 2013 20:49:05 +0000</pubDate>
		<guid isPermaLink="false">http://neophob.com/?p=1412#comment-1941</guid>
		<description><![CDATA[guess the 18th chip or led is broken. cut off a strip of 60 leds from the other end of the reel and works as expected!
thanks again and good work!]]></description>
		<content:encoded><![CDATA[
Warning: preg_replace(): The /e modifier is no longer supported, use preg_replace_callback instead in /home/httpd/vhosts/pixelinvaders.ch/httpdocs/neophob.com/wp-content/plugins/codecolorer/codecolorer-core.php on line 49

Warning: preg_replace(): The /e modifier is no longer supported, use preg_replace_callback instead in /home/httpd/vhosts/pixelinvaders.ch/httpdocs/neophob.com/wp-content/plugins/codecolorer/codecolorer-core.php on line 50
]]></content:encoded>
	</item>
	<item>
		<title>By: michu</title>
		<link>http://neophob.com/2012/01/stripinvaders-howto-assemble/#comment-1928</link>
		<dc:creator><![CDATA[michu]]></dc:creator>
		<pubDate>Thu, 02 May 2013 10:28:28 +0000</pubDate>
		<guid isPermaLink="false">http://neophob.com/?p=1412#comment-1928</guid>
		<description><![CDATA[well if you see random flicker you have a) too less power (as you would have for example if you try to power the leds from the arduino) b) no common ground or c) a loose contact.]]></description>
		<content:encoded><![CDATA[
Warning: preg_replace(): The /e modifier is no longer supported, use preg_replace_callback instead in /home/httpd/vhosts/pixelinvaders.ch/httpdocs/neophob.com/wp-content/plugins/codecolorer/codecolorer-core.php on line 49

Warning: preg_replace(): The /e modifier is no longer supported, use preg_replace_callback instead in /home/httpd/vhosts/pixelinvaders.ch/httpdocs/neophob.com/wp-content/plugins/codecolorer/codecolorer-core.php on line 50
]]></content:encoded>
	</item>
	<item>
		<title>By: roman</title>
		<link>http://neophob.com/2012/01/stripinvaders-howto-assemble/#comment-1916</link>
		<dc:creator><![CDATA[roman]]></dc:creator>
		<pubDate>Wed, 01 May 2013 21:40:49 +0000</pubDate>
		<guid isPermaLink="false">http://neophob.com/?p=1412#comment-1916</guid>
		<description><![CDATA[Hi Michu
first: great project! Congratulations!

I bought myself 5m of WS2801 and connected it to my Uno with Ethernet shield. I power the strip with a 5V/5A power supply.
For my living room I am using only 1.9m (60 LEDs). On the packaging of the WS2801 it says 7.8W/m so the supply should deliver enough juice...
So I uploaded the sketch and I could ping the arduino and I set up the OSC GUIs on my iPad and iPhone. And it just worked out of the box :) I was really happy.
I then wanted to power the Uno from the 5V power supply too (let the GND from the supply connected to GND of the Uno) but had weird behaviour: The strip only worked with like the first 17 LEDs. The others were blank. I let it be for some minutes and it started kind of working again but just randomly: the first 17 LEDs were working as expected, LED 18 to around 25 were not working and the rest were working randomly.
This behaviour continued even when I got back to power the Uno from the USB cable - only the first 17 LEDs were working as expected.
I even uploaded the WS2801 examples (strandtest, christmas, stars) and also same behaviour.

Did I break something? Or is the Etherned shield interfering somehow the data/clock connection to the LED strip? I had the data on 3 and the clock on 2 but also tried with pins 8 and 7... same behaviour.

Well, any help appreciated.]]></description>
		<content:encoded><![CDATA[
Warning: preg_replace(): The /e modifier is no longer supported, use preg_replace_callback instead in /home/httpd/vhosts/pixelinvaders.ch/httpdocs/neophob.com/wp-content/plugins/codecolorer/codecolorer-core.php on line 49

Warning: preg_replace(): The /e modifier is no longer supported, use preg_replace_callback instead in /home/httpd/vhosts/pixelinvaders.ch/httpdocs/neophob.com/wp-content/plugins/codecolorer/codecolorer-core.php on line 50
]]></content:encoded>
	</item>
	<item>
		<title>By: michu</title>
		<link>http://neophob.com/2012/01/stripinvaders-howto-assemble/#comment-1840</link>
		<dc:creator><![CDATA[michu]]></dc:creator>
		<pubDate>Tue, 23 Apr 2013 18:14:05 +0000</pubDate>
		<guid isPermaLink="false">http://neophob.com/?p=1412#comment-1840</guid>
		<description><![CDATA[That does&#039;t matter, if your strips need 12v, feed&#039;em 12v. This has nothing to do with the data signal.]]></description>
		<content:encoded><![CDATA[
Warning: preg_replace(): The /e modifier is no longer supported, use preg_replace_callback instead in /home/httpd/vhosts/pixelinvaders.ch/httpdocs/neophob.com/wp-content/plugins/codecolorer/codecolorer-core.php on line 49

Warning: preg_replace(): The /e modifier is no longer supported, use preg_replace_callback instead in /home/httpd/vhosts/pixelinvaders.ch/httpdocs/neophob.com/wp-content/plugins/codecolorer/codecolorer-core.php on line 50
]]></content:encoded>
	</item>
	<item>
		<title>By: Ben</title>
		<link>http://neophob.com/2012/01/stripinvaders-howto-assemble/#comment-1837</link>
		<dc:creator><![CDATA[Ben]]></dc:creator>
		<pubDate>Tue, 23 Apr 2013 16:39:18 +0000</pubDate>
		<guid isPermaLink="false">http://neophob.com/?p=1412#comment-1837</guid>
		<description><![CDATA[Ahhh I&#039;ve figured it out I think. As I mentioned before, i&#039;m working with 12v WS2801 digital strips. The issue, I believe, is that while I have a power supply that runs at 12v, the data and clock pins on the Arduino still are outputting at 5v. Would you happen to have any configurations for amplifying the data through a breadboard?]]></description>
		<content:encoded><![CDATA[
Warning: preg_replace(): The /e modifier is no longer supported, use preg_replace_callback instead in /home/httpd/vhosts/pixelinvaders.ch/httpdocs/neophob.com/wp-content/plugins/codecolorer/codecolorer-core.php on line 49

Warning: preg_replace(): The /e modifier is no longer supported, use preg_replace_callback instead in /home/httpd/vhosts/pixelinvaders.ch/httpdocs/neophob.com/wp-content/plugins/codecolorer/codecolorer-core.php on line 50
]]></content:encoded>
	</item>
	<item>
		<title>By: michu</title>
		<link>http://neophob.com/2012/01/stripinvaders-howto-assemble/#comment-1820</link>
		<dc:creator><![CDATA[michu]]></dc:creator>
		<pubDate>Thu, 18 Apr 2013 07:41:37 +0000</pubDate>
		<guid isPermaLink="false">http://neophob.com/?p=1412#comment-1820</guid>
		<description><![CDATA[Are you sure you configured StripInvaders correctly? concrete, did you configure data and clock pin on pin 2 and 3? maybe you reversed the clk and data pin?]]></description>
		<content:encoded><![CDATA[
Warning: preg_replace(): The /e modifier is no longer supported, use preg_replace_callback instead in /home/httpd/vhosts/pixelinvaders.ch/httpdocs/neophob.com/wp-content/plugins/codecolorer/codecolorer-core.php on line 49

Warning: preg_replace(): The /e modifier is no longer supported, use preg_replace_callback instead in /home/httpd/vhosts/pixelinvaders.ch/httpdocs/neophob.com/wp-content/plugins/codecolorer/codecolorer-core.php on line 50
]]></content:encoded>
	</item>
	<item>
		<title>By: Ben</title>
		<link>http://neophob.com/2012/01/stripinvaders-howto-assemble/#comment-1810</link>
		<dc:creator><![CDATA[Ben]]></dc:creator>
		<pubDate>Tue, 16 Apr 2013 01:05:23 +0000</pubDate>
		<guid isPermaLink="false">http://neophob.com/?p=1412#comment-1810</guid>
		<description><![CDATA[Hey michu,

I&#039;ve been working on an LED strip system in my house for quite a while, but have hit a road bump and need help. I&#039;ve been able to upload all the software to the arduino no problem, but am still seeing no light start up at all. The difference between our systems is that I&#039;m working with digital LED strips that run on 12v. I have the data pin in 2, clock in 3, and the power/ground where they should be. Could you offer any advice as to why I still am not seeing anything light up?

Hope to hear from you soon!]]></description>
		<content:encoded><![CDATA[
Warning: preg_replace(): The /e modifier is no longer supported, use preg_replace_callback instead in /home/httpd/vhosts/pixelinvaders.ch/httpdocs/neophob.com/wp-content/plugins/codecolorer/codecolorer-core.php on line 49

Warning: preg_replace(): The /e modifier is no longer supported, use preg_replace_callback instead in /home/httpd/vhosts/pixelinvaders.ch/httpdocs/neophob.com/wp-content/plugins/codecolorer/codecolorer-core.php on line 50
]]></content:encoded>
	</item>
	<item>
		<title>By: michu</title>
		<link>http://neophob.com/2012/01/stripinvaders-howto-assemble/#comment-1725</link>
		<dc:creator><![CDATA[michu]]></dc:creator>
		<pubDate>Mon, 25 Mar 2013 20:03:25 +0000</pubDate>
		<guid isPermaLink="false">http://neophob.com/?p=1412#comment-1725</guid>
		<description><![CDATA[Anywhere you want, as it&#039;s currently not used ;)

Reason: too less space left on a Arduino.]]></description>
		<content:encoded><![CDATA[
Warning: preg_replace(): The /e modifier is no longer supported, use preg_replace_callback instead in /home/httpd/vhosts/pixelinvaders.ch/httpdocs/neophob.com/wp-content/plugins/codecolorer/codecolorer-core.php on line 49

Warning: preg_replace(): The /e modifier is no longer supported, use preg_replace_callback instead in /home/httpd/vhosts/pixelinvaders.ch/httpdocs/neophob.com/wp-content/plugins/codecolorer/codecolorer-core.php on line 50
]]></content:encoded>
	</item>
	<item>
		<title>By: intro</title>
		<link>http://neophob.com/2012/01/stripinvaders-howto-assemble/#comment-1723</link>
		<dc:creator><![CDATA[intro]]></dc:creator>
		<pubDate>Mon, 25 Mar 2013 19:00:40 +0000</pubDate>
		<guid isPermaLink="false">http://neophob.com/?p=1412#comment-1723</guid>
		<description><![CDATA[Hi there,
Someone know where to connect the microphone on the base shield V1.3?
Thanks in advance :)]]></description>
		<content:encoded><![CDATA[
Warning: preg_replace(): The /e modifier is no longer supported, use preg_replace_callback instead in /home/httpd/vhosts/pixelinvaders.ch/httpdocs/neophob.com/wp-content/plugins/codecolorer/codecolorer-core.php on line 49

Warning: preg_replace(): The /e modifier is no longer supported, use preg_replace_callback instead in /home/httpd/vhosts/pixelinvaders.ch/httpdocs/neophob.com/wp-content/plugins/codecolorer/codecolorer-core.php on line 50
]]></content:encoded>
	</item>
	<item>
		<title>By: michu</title>
		<link>http://neophob.com/2012/01/stripinvaders-howto-assemble/#comment-1721</link>
		<dc:creator><![CDATA[michu]]></dc:creator>
		<pubDate>Mon, 25 Mar 2013 15:38:58 +0000</pubDate>
		<guid isPermaLink="false">http://neophob.com/?p=1412#comment-1721</guid>
		<description><![CDATA[Hey Vincent
Sorry, what&#039;s exactly the issue? HOW does the output fails? What kind of problems did you encounter before? What Arduino version did you use to compile StripInvaders? Try using the latest Arduino version, some memory issues were fixed in this version.

Cheers]]></description>
		<content:encoded><![CDATA[
Warning: preg_replace(): The /e modifier is no longer supported, use preg_replace_callback instead in /home/httpd/vhosts/pixelinvaders.ch/httpdocs/neophob.com/wp-content/plugins/codecolorer/codecolorer-core.php on line 49

Warning: preg_replace(): The /e modifier is no longer supported, use preg_replace_callback instead in /home/httpd/vhosts/pixelinvaders.ch/httpdocs/neophob.com/wp-content/plugins/codecolorer/codecolorer-core.php on line 50
]]></content:encoded>
	</item>
	<item>
		<title>By: Vince</title>
		<link>http://neophob.com/2012/01/stripinvaders-howto-assemble/#comment-1720</link>
		<dc:creator><![CDATA[Vince]]></dc:creator>
		<pubDate>Mon, 25 Mar 2013 15:26:12 +0000</pubDate>
		<guid isPermaLink="false">http://neophob.com/?p=1412#comment-1720</guid>
		<description><![CDATA[Hi there,
This program has been running a long time succesfully, but recently I encountered some problems again.  It seems that the input works perfectly, but the output fails. So I can send commands properly, but the ledstrip doesn&#039;t react. I tested the ledstrip, and in functions like it should. The arduino has been on for a long time, so I don&#039;t if this can do some damage.
Thanks in advance.]]></description>
		<content:encoded><![CDATA[
Warning: preg_replace(): The /e modifier is no longer supported, use preg_replace_callback instead in /home/httpd/vhosts/pixelinvaders.ch/httpdocs/neophob.com/wp-content/plugins/codecolorer/codecolorer-core.php on line 49

Warning: preg_replace(): The /e modifier is no longer supported, use preg_replace_callback instead in /home/httpd/vhosts/pixelinvaders.ch/httpdocs/neophob.com/wp-content/plugins/codecolorer/codecolorer-core.php on line 50
]]></content:encoded>
	</item>
	<item>
		<title>By: michu</title>
		<link>http://neophob.com/2012/01/stripinvaders-howto-assemble/#comment-1113</link>
		<dc:creator><![CDATA[michu]]></dc:creator>
		<pubDate>Tue, 05 Feb 2013 15:47:15 +0000</pubDate>
		<guid isPermaLink="false">http://neophob.com/?p=1412#comment-1113</guid>
		<description><![CDATA[You have too less space left on a Arduino UNO (or duemillanove) board. You can disable some features like bonjour OR play with some settings of the libraries. Or use a larger board like Arduino MEGA.]]></description>
		<content:encoded><![CDATA[
Warning: preg_replace(): The /e modifier is no longer supported, use preg_replace_callback instead in /home/httpd/vhosts/pixelinvaders.ch/httpdocs/neophob.com/wp-content/plugins/codecolorer/codecolorer-core.php on line 49

Warning: preg_replace(): The /e modifier is no longer supported, use preg_replace_callback instead in /home/httpd/vhosts/pixelinvaders.ch/httpdocs/neophob.com/wp-content/plugins/codecolorer/codecolorer-core.php on line 50
]]></content:encoded>
	</item>
</channel>
</rss>
